Showing all 33 results
Unimig SC80 Plasma Torch Retaining Cap0 out of 5
Unimig SC80 Plasma Torch Retaining Cap – SC8030
The UNIMIG Retaining Cap is designed to hold all the consumables onto the torch head, used for standoff cutting.
Unimig Welding Helmet Lens Cover – Inner 103X47MM0 out of 5
Unimig Welding Helmet Lens Cover – Inner 103X47MM – PUMIP
Replacement cover lenses for your welding helmet. Inner cover lenses offer protection on the surface of the Auto-Darkening Filter from scratches, heat and spatter.
Unimig SC30 Plasma Torch Swirl Ring0 out of 5
Unimig SC30 Plasma Torch Swirl Ring – WGSC2506
UNIMIG SC30 Swirl Rings have been designed to control and swirl the compressed air around the electrode and into the nozzle. It plays a crucial part in ensuring longer consumable life and clean-cut quality.
- Made from Vespel
- Extends consumable life
- Used for clean-cut quality
- Long Lasting Replacement
- Suits the SC30 Plasma Torch & LC25 Torch from PC210 Plasma Cutter
Unimig ARC Torchology® Tig Torch Gas Lens Collet Bodies0 out of 5
Unimig ARC Torchology® Tig Torch Gas Lens Collet Bodies – UMCT2GL16
ARC TORCHOLOGY® TIG Torch Collet Bodies are designed with a highly effective series of passages to force cool the collet, maximising conductivity and extending consumable life. As a result, ARC TORCHOLOGY® TIG Torch Collet Bodies feature up to 10x longer consumable life compared to standard UNIMIG collet bodies.
Unimig T2 & T3W TIG Gas Lens Collet Body with Improved Laminar Gas Flow
- 1.6mm Gas Lens Collet Body
- Suits T2 & T3W Torches
Unimig WZ8 0.8% Zirconiated Tungsten Electrodes0 out of 5
Unimig WZ8 0.8% Zirconiated Tungsten Electrodes – PTR0006-24
Zirconiated tungsten electrodes is most commonly used for AC welding. Zirconiated tungsten produces a very stable arc and is resistant to tungsten spitting. It is ideal for AC welding as it retains a balled tip as well as has a high resistance to contamination. It has a current-carrying capacity that is equal to or greater than that thoriated tungsten.
- Zirconiated tungsten electrodes (AWS classification EWZr-1)
- Contain a minimum of 99.10 percent tungsten and 0.15 to 0.40 percent zirconium.
- Current-carrying capacity is equal to or greater than that of thoriated tungsten.
- Zirconiated tungsten is not recommended for DC welding.
Unimig Binzel Style Contact Tips – 6 pack0 out of 5
Unimig Binzel Style Contact Tips – PCT0008-09
UNIMIG Binzel style contact tips are designed with a solid copper construction for increased conductivity and spatter resistance, this leaves you with a cleaner finish and improved life of your contact tip
- MIG Torch: SB36 & SB38
Unimig Aluminium Tig Welding Rods 53560 out of 5
Unimig Aluminium Tig Welding Rods – AT5356-1.6-1KG
UNIMIG 5356 Aluminium TIG Welding Rods are a triple shaved TIG wire for the purpose of welding cats and wrought aluminium and specifically the 3000, 5000 & 6000 series. The wire has excellent weldability and corrosion resistance.
5356 is sometimes referred to as “marine grade” as it is widely used in the marine industry and it’s very commonly found in general fabrication applications as well. The major element in 5356 wire is 5% magnesium.
- High Quality
- Triple Shaved
- X-Ray Quality
- Low Fume Factor
- Cleaner Welds
- Lloyds Register
Unimig ER70S-6 Mild Steel Mig Wire0 out of 5
Unimig ER70S-6 Mild Steel Mig Wire – MS.9B
UNIMIG ER70S-6 is a high quality, copper coated, triple de-oxidised solid MIG welding wire supplied on 15kg / 5kg and 1Kg Plastic Spools. UNIMIG ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding. It is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires.
- Structural Steel – General Fabrication – Light Fabrication
- Transport Industry -Heavy Equipment – Farm Machinery
- Pressure Vessels – Robotic and Semi Automatic Welding Applications
- Higher levels of manganese and silicon than most standard grades of MIG wire.
- High silicon content for a smoother bead appearance and and minimal post-weld grinding.
- Porosity-free, x-ray quality welds with high tensile strength
- High Quality
- Triple De-oxidised
- X-Ray Quality
- Precision Layer Wound
- Smooth Feeding
- Clean Weld Finish
- International Approvals
- AS/NZS 2717.1:ES6 – CG – W503H
- APPROVALS 5KG AND 15 KG SPOOLS
- LLOYDS REGISTER
- DET NORSKE VERITAS
- AMERICAN BUREAU OF SHIPPING
- GERMANISCHER LLOYD
- CANADIAN WELDING BUREAU
Unimig Hyperarc 16TC Low-Hydrogen Electrodes0 out of 5
Unimig Hyperarc 16TC Low-Hydrogen Electrodes – U63008
The HYPERARC 16TC, Twin Coated 7016 Low Hydrogen electrode offers total performance and features excellent arc stability, low spatter levels and easy slag removal. With its all positional capabilities (except vertical down) it is the optimum choice when high quality welding is required. Suitable for structural, earth moving equipment, maintenance, and piping. The Hyperarc 16TC electrode will cover every job you need where quality and performance matter.
- Excellent arc stability
- High penetration
- Less spatter and easy releasing slag
- Concentrated arc
- Structural Steel Fabrication
- Pressure Vessel welding
- Pipe welding
- Repair work for Agriculture and machinery
- Earthmoving equipment repairs
- Layering, “Buttering”
Unimig 4M ARC Welding Lead Set0 out of 5
Unimig 4M ARC Welding Lead Set – LS16-35/50-1
The UNIMIG 4m Arc Welding Lead Set consists of an electrode holder and earth clamp along with their appropriate leads, fully assembled and ready for use. It is designed to hold electrodes firmly in 45°, 90° or 180° positions, to assist in various types of welding practice. The electrode holder has a heavy-duty, fully insulated handle for high conductivity, and improved cable connections for optimal performance and reliability. The earth clamp is designed with copper and brass jaw pads for optimum conductivity, providing you with a strong, positive electrical connection.
- Premium twist-lock electrode holder
- Australian industrial-standard welding cable
- Double insulated flexible welding cable
- 1 x 4m cable
- 1 x 400amp electrode holder
- 1 x 300amp earth clamp
- 1 x 35/50 connector
Unimig Earth Clamps0 out of 5
Unimig Earth Clamps – EC200
UNIMIG Earth Clamps are designed with copper and brass jaw pads for optimum conductivity, this provides a strong, positive electrical connection.
- Strong copper and brass jaw pads
- Consistent positive electrical connection
- Strong clamping force
- Easy to connect and disconnect
- comfortable grip
- holds strong earth in all positions
Unimig Small Machine Welding Trolley0 out of 5
Unimig Trolley to Suit MIG Inverters – UMJRTROLLEY2
The UNIMIG Small Machine Welding Trolley is ideal if you are tired of moving your welding and gas gear around the workshop manually. With easy setup, the small machine trolley can perfectly fit your setup, while also holding a D or E size gas cylinder on the back. An upward angle on the top also ensures that you can easily change the settings on your welder on the fly, and the middle shelf can be used for accessories. Made from a sturdy metal construction, free-moving front castor wheels and solid rear rubber wheels means you will get a long lifespan from this trolley.
Suits smaller machines.
- Sturdy metal construction
- Top shelf angled to change welding settings on the fly
- Built-in middle shelf for welding accessories
- Suitable for D and E size gas cylinders
Unimig Gas Welding Goggles0 out of 5
Unimig Gas Welding Goggles – UFGOG
UNIMIG Gas Welding Goggles protect your eyes from radiation, splashes and other flying particles. With other added features such as our vented design to prevent fogging and soft PVC frame, they are comfortable to wear for long periods of time. When the shaded lenses are flipped up the user is still protected by a set of clear lenses. This also saves having to remove them in-between welding, brazing and cutting operations.Made with a one piece polycarbonate lens which is great for gas welding, cutting and brazing. Not only protecting your eyes from splashes and flying particles, but also limiting radiation.Features
- For Oxygen / Acetylene / LPG / Propane.
- Rated to shade 5
- Lift up lens and vents to give good visibility before you weld while fitting over prescription or safety glasses.
- Only suitable for gas welding.
- Soft pliable frame comfortable to wear.
- Non reflective matt interior finish.
- Vented to prevent fogging.
Unimig Gas Cutting Attachment0 out of 5
Unimig Gas Cutting Attachment – UF3CA
UNIMIG Gas Cutting Attachment is compatible for both Type 41 (Oxygen/LPG) tips. It features locking teeth for secure positioning and a solid brass construction resulting in a durable frame that can also withstand high temperatures. The design also prevents any harmful flashbacks.
- UNIMIG Gas Cutting Attachment is compatible for both Type 41 (Oxygen/Acetylene) and Type 44 (Oxygen/LPG) tips.
- It features locking teeth for secure positioning.
- Solid brass construction resulting in a durable frame that can also withstand high temperatures.
- The design also prevents any harmful flashbacks.Suits all TYPE 41 and TYPE 44 cutting tips.
- Cuts up to 150mm plate.
- High quality needle valve for fast and accurate flame adjustment.
- O-ring seal to form a perfect gas-tight seal.
- Press lever for easy cutting use.
Unimig Welding Curtain0 out of 5
Unimig Welding Curtain – XARWC
The UNIMIG Welding Curtain is used as a transparent screen to protect people from welder’s flash and dangerous ultraviolet rays. The UNIMIG Welding Curtain gives the welder less light glare and works perfectly in any environment, inside or outside. It features four reinforced eyelets for secure mounting, and is made with long-lasting fire-resistant material that will not crack or harden overtime.
- Specially formulated cinyl 16 mil
- 0.4mm thick to meet CE standards and Aus NZ safety requirements
- Screens are transpararent and resistant to UV rays, flame and abrasion
- Kevlar sewn and grommets at 270mm intervals
Unimig Rogue™ Welding Jacket0 out of 5
Unimig Rogue™ Welding Jacket – UMBJ-M
The ROGUE™ PROBAN® Welding Jacket is well-ventilated, comfortable and an ideal jacket for light-duty welding applications even in hot conditions. The Proban material is light and ventilates easily, increasing comfort in hot conditions. The cuffs are easily adjustable with buttons, whereas Kevlar thread enhances the durability of the jacket. The UNIMIG ROGUE Proban Welding Jacket is designed for extended use in hot conditions, allowing you to get on with the job. Proban flame retardant fabric will char and self extinguish when it comes into contact with a flame or spark. There is no smouldering or afterglow therefore providing protection for the wearer.
Unimig Rogue Heavy Duty Welding Gloves0 out of 5
Unimig Rogue Heavy Duty Welding Gloves – UMWG8
The ROGUE™ Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. Made from heat and flame-resistant premium split cowhide and high-strength Kevlar stitching. The standard feature of these gloves include a full sock lining for added comfort, a reinforced palm with welted seams for added durability and comfort where and when you need it most.
Unimig Welding Goggles0 out of 5
Unimig Welding Goggles – U21001K
The UNIMIG Welding Goggles provide protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, the Goggles provide 5-13 Shade control as well as GRIND mode for use when grinding. The UNIMIG Welding Goggles feature ELITEVISION™ Lens Technology, ensuring you always get a clear and natural view of your surroundings and workpiece.
The UNIMIG Welding Goggles have been designed to be versatile in their usage. There is room under the mask to fit an Elipse® Half-Mask P2 Respirator. The mask itself can also be removed so that only the goggles can be used. In addition, the goggles also feature an alternate elastic headband, giving you multiple options to wear the goggles as desired.
It is suitable for MIG, TIG (Minimum 5A) and STICK welding, as well as plasma cutting.
Unimig Chaos™ Welding Helmet0 out of 5
Unimig Chaos™ Welding Helmet – UM-H-CHAOS
The CHAOS™ Automatic Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 4 arc sensors, the CHAOS™ Welding Helmet features 9-13 Shade control as well as GRIND mode for use when grinding. A 100x60mm view allows for large view of the work area, while a replaceable backup battery improves the performance of the auto-darkening filter. It is suitable for MIG, TIG (Minimum 3A) and STICK welding, as well as plasma cutting.
The CHAOS™ Welding Helmet comes with ELITEVISION™ Lens Technology to ensure you always get a clear and natural view of your surroundings and workpiece.
Unimig Toxic Welding Helmet0 out of 5
The TOXIC Automatic Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, the TOXIC Welding Helmet features 9-13 Shade control as well as GRIND mode for use when grinding. It is suitable for MIG, TIG (Minimum 5A) and STICK welding, as well as plasma cutting.
The TOXIC Welding Helmet comes with ELITEVISION™ Lens Technology to ensure you always get a clear and natural view of your surroundings and workpiece.
Unimig Razor Cut 45 Plasma Cutter0 out of 5
The RAZOR™ CUT 45 is the perfect plasma cutter for the professional who wants a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is made for the workshop and worksite. The RAZOR™ CUT 45 boasts some serious cutting power with 16mm clean cut and 20mm severance.
Unimig Oxygen And LPG Gas Kit0 out of 5
Our Oxygen and LPG Gas Kit includes everything you need for general purpose gas cutting and welding. Each kit comes in a carry-all tool box and has been engineered for safety and quality that you know you can rely on.
- More than 20 cutting and welding equipment and parts
- Tough PVC tool box
- Compliant with Australian Standards
Unimig Oxygen And Acetylene Gas Kit0 out of 5
Our Oxygen and Acetylene Gas Kit includes everything you need for general purpose gas cutting and welding. Each kit comes in a carry-all tool box and has been engineered for safety and quality that you know you can rely on.
- More than 20 cutting and welding equipment and parts
- Tough PVC tool box
- Compliant with Australian Standards
Unimig Razor 250 Compact Mig/Tig/Stick Welder0 out of 5
Unimig Razor 250 Compact Mig/Tig/Stick Welder – KUMJR250K-SG
The RAZOR™ 250 Compact is a powerful workshop machine with MIG, TIG and STICK welding functions. Built with solid construction, this machine is designed to withstand the toughest conditions. The RAZOR™ 250 Compact is also Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size.
The RAZOR™ Compact series is designed for superior performance, offering the highest quality of welds from UNIMIG’s range.
- 240V Single-Phase
- Gas-shielded & Gasless MIG / Lift Arc DC TIG / STICK
- Geared Wire Drive
- Spool Gun Ready
- Push-Pull Gun Ready
Razor 200 AC/DC Tig Welder0 out of 5
The RAZOR™ 200 AC/DC gives you full control over High Frequency AC/DC TIG welding for incredible results from start to finish. Fitted with a portable 15 AMP plug and Pulse TIG functions, this is your go-to professional unit that works a treat on any worksite.
Tailor your TIG settings with a wide range of controllable parameters including Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas Time.
The all-new ARC TORCHOLOGY T2 TIG Torch comes standard with the RAZOR™ 200 AC/DC, offering up to 30% better power-to-weight ratio and longer consumable lifecycles. A Remote Foot Control can also be plugged into the machine for even more versatility.
Razor ARC 180 Stick Welder0 out of 5
The RAZOR™ ARC 180 is the perfect STICK and TIG welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is designed to be taken between the workshop and worksites. Connecting a 17V TIG Torch provides DC Lift Arc TIG functionality.
Razor ARC 140 Stick/Tig Welder0 out of 5
The RAZOR™ ARC 140 is the perfect STICK and TIG welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 10 AMP plug, this machine is designed to be taken between the workshop and worksites with ease. Connecting a 17V TIG Torch provides DC Lift Arc TIG functionality.
Razor 200 Mig/Stick Welder0 out of 5
The RAZOR™ 200 is the perfect MIG and STICK welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is designed for the workshop and for site work. The Spool Gun connection gives you the added flexibility of using softer wires and smaller spools, giving you all the features you need in a lightweight machine.
Razor 175 Mig/Stick Welder0 out of 5
The RAZOR™ 175 is the perfect MIG and STICK welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is designed for the workshop and for site work. The Spool Gun connection gives you the added flexibility of using softer wires and smaller spools, giving you all the features you need in a lightweight machine.
Viper Cut 30 Plasma Cutter0 out of 5
The all-new VIPER™ CUT 30 plasma cutter is specifically designed for the DIY enthusiast. Fitted with a 10 AMP plug, it’s never been easier to set up a plasma cutter at home or in your workshop.
Bigger doesn’t always mean better – a more effective output has allowed the VIPER™ CUT 30 to clean cut up to 12mm Mild Steel.
Viper 185 Mig/Tig/Stick Welder0 out of 5
The VIPER™ 185 is the ultimate multi-process welder for the DIY enthusiast. MIG, TIG or STICK, the VIPER™ does it all, and it’s ready to go anywhere you have a standard 10-amp outlet. Get repairs done and see your projects come together in record time with the ability to change modes with the flick of a switch.
The VIPER™ 185 is the perfect solution for those looking for insane performance without needing to blow your budget on multiple welders.
Unimig Viper 120 Synergic Mig Welder0 out of 5
Welding has never been easier with the VIPER™ 120 SYNERGIC. Simply set your wire size, adjust the Synergic power knob and the VIPER™ does the rest! Running off a 10 AMP plug, this machine is perfect for small repairs and DIY welding projects.
The VIPER™ 120 SYNERGIC features MIG programs for 0.6mm, 0.8mm and 0.9mm wire. It can take Flux-Cored, Mild Steel and Stainless Steel MIG wires.
The built-in 10 AMP Plug makes this the perfect welder for your home workshop or out on the field. Weighing just 5.2kg, you’ll be able to take the VIPER™ 120 SYNERGIC anywhere you need.
Unimig Viper ARC 140 Stick Welder0 out of 5
Unimig Viper ARC 140 Stick Welder – KUMJRVA140
The VIPER 140 is a new generation, low cost welding machine produced using the latest in IGBT inverter technology. Designed to meet the needs of the price conscious non-commercial user without compromising on quality, this machine is as reliable and robust as you would expect a machine bearing the UNIMIG name to be. The DC MMA welding function delivers a smooth and incredibly stable arc allowing easy welding with electrodes producing high quality welds including cast Iron, stainless steel and low hydrogen. The VIPER 140 is also equipped with Scratch Start DC TIG capability and connection of the 17V TIG torch allows DC TIG welding of steel, stainless steel, bronze and copper. The unique electronic design structure and air channel design in this machine speeds up the heat disapation improving the duty cycle of the machine. The unique air channel design also effectively reduces dust ingestion by the fan, dust build up and absorbtion by the electronic circuits and power device is minimised thereby improving the reliability of the machine. The VIPER 140 is an exceptional machine for the price and is suitable for a wide range of applications including light fabrication and farming. The VIPER 140 offers great portability with the power to get the job done and with the convenience of being fitted with a 10 amp domestic plug. Manufactured in compliance to AS/NZ60974.1.
- 1 x Viper Arc 140 DC MMA/ Scratch Start TIG Power Source
- 1 x 3 metre Arc Welding lead set including tong type electrode holder & 200 Amp earth clamp
- 1 x Instruction Manual
- Latest IGBT inverter technology
- MMA (stick electrode)
- Hot start (improves electrode starting)
- Arc Force (boosts current to prevent electrode extinguishing)
- Excellent arc stability with all electrodes
- DC Scratch start TIG, basic DC TIG application
- Thermal overload protection
- IP21S rating for environmental/safety protection
- Generator compatible (recommend 6.5 KVA minimum)
- Tolerant to variable power supplies
- Fitted with and approved to use domestic 10 amp plug