Wacker Neuson
Showing all 16 results
-
Wacker Neuson DPU4045Yehzf 4.9kW Diesel Reversible Vibratory Plate
View productWacker Neuson DPU4045Yehzf 4.9kW Diesel Reversible Vibratory Plate
Thanks to its excellent compaction force combined with a quick forward and reverse travel direction, the DPU4045 offers a high level of productivity. It is equipped with a Yanmar diesel engine and is an all-rounder for all job sites where high demands are placed on the performance efficiency of a unit. In addition, it offers excellent characteristics in terms of service life and operating comfort. Optimal application areas are the compaction of frost coverings and subbases in street, path and parking lot construction as well as backfilling buildings. Thanks to a frequency of 69 Hz, the DPU4045 is universally applicable and even reliably compacts medium-weight interlocking paving stones.- The new center pole reduces hand-arm vibration (HAV) to a minimum and therefore offers a high level of comfort at full compaction performance. No restriction for operation time and no documentation effort.
- A dead man function prevents the operator from being trapped between the equipment and an object when working in reverse.
- All maintenance points are quickly and easily accessible. Extensive comfort functions: low oil shutdown, self-tightening V-belt, maintenance-free alternator, pull-out external jump-start connection accessible from outside.
- A large dimensioned Yanmar diesel engine offers sufficient power reserves. It ensures efficiency and long service life.
- New positioning of the operator’s controls in a sturdy housing — better protection against dirt and damage.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson BFS Floor Saw
View productWacker Neuson BFS Floor Saws
The gasoline-driven floor saw series by Wacker Neuson is particularly characterized by its superior cutting performance. All model versions are up to 20 percent faster than comparable devices so that the BFS series offers the highest cutting speed with a quiet operation. This is because the torque that is transmitted to the diamond blade and the center of gravity that is above the cutting shaft are efficiently adapted to each other. And this with a low weight, because the BFS series is the lightest in its class.- Low hand-arm-vibrations below 5 m/s²
- Superior cutting performance: Up to 20 % faster than comparable devices
- Requires very little maintenance due to lifetime-lubricated bearings
- High directional stability through the high tensile strength frame and ball-bearing wheels
- Variably adjustable cutting depth
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson Drive Unit HD3.7 MIV FWP SP Petrol – HD3.7
View productWacker Neuson Drive Unit HD3.7 MIV FWP SP Petrol – HD3.7
The HD3.7 drive unit from Wacker Neuson is a perfectly designed, simple to use, multipurpose drive unit which the competition have been attempting to copy for decades. Â These drive units have been manufactured by Wacker Neuson for over 40 years. Â They are designed to run both pumps and a range of vibrators, making them the prefect addition to any construction site.
Features:Â
- Reliability
- Wacker Neuson has been making construction equipment for over 160 year with proven engineering experience.
- Powered by a Genuine Honda engine.
- Versatility
- Universal design allows for use with products from other manufacturers.
- Drives vibrators from 25mm to 60mm.
- Drives submersible pumps.
- Extensions available.
- Ease of use
- Dished steel base for ease of transport over concrete reinforcing mesh.
- Universal 3 dog coupling works with all reputable manufacturers.
- Safety
- Light weight construction.
- Ergonomically designed roll cage for lifting.
- Central lifting point for crane use. Starter rope is positioned so if the plate takes off on starting it will take off away from the operator.
- Maintenance
- Long life dual stage air filters fitted for low maintenance.
- Cast iron bell housing for long service life.
- Robust fabricated roll bar.
- Coupling bolted to shaft, no chance of slipping or movement as found on inferior products.
- Accessories
- 25, 28, 38, 40, 57 and 60mm vibrators.
- Submersible pumps.
- Reliability
-
Wacker Neuson VPH70 Range (10-20 kN)
View productWacker Neuson VPH70 Range (10-20 kN)
With a range of reliable and powerful engines, low weight, compact dimensions and low-maintenance design, the VP 70 series Vibratory Plates are ideal for compaction of sand, crushed rock, granular materials and segmental brick paving.- Compact design with centrally mounted, for an even spread of compactive force over the whole base plate.
- Sturdy 4-stroke petrol or diesel engine with recoil starter is isolated from vibration by rubber dampers.
- Vibration isolated reversible handle with throttle control for ease of operation and reduced operator fatigue.
- Conveniently placed lifting handles, and a central lifting point for safe and easy handling.
- Low maintenance design, backed by Wacker Neuson quality, reliability and product support.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson Telehandler TH412
View productWacker Neuson Telehandler TH412
It’s impressive how much power there is packed in the TH412 compact telehandler. The TH412 Wacker Neuson telehandler is unique in its combination of high lifting height, lean width and strong machine performance. A true multi-talent for works in municipalities, factories, building yards and at construction sites.- Equipped with the innovative VLS driver assist system (Vertical Lift System).
- Extremely small inside radius of 821 mm.
- Enormous lifting height of 4.5 m in combination with a payload of 1.2 t.
- Efficient 31 PS Yanmar engine—optional 40 PS available.
- Hydraulic quick change system for a great assortment of attachments.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson Dingo Mini Loader – SM325-27W
View productDingo Mini Loader
The Wacker Neuson Dingo Mini Loader is a versatile piece of equipment that is vital for worksites and home projects alike. It has effective running costs with its 27-horsepower diesel engine combined with a hydraulic design to provide power and capability for a range of applications. All-wheel drive means it can be used on all terrains and its optional narrow wheel and hub set mean you can access the narrowest of spaces with ease.
This efficient mini loader, which features soft-touch controls and 180-degree access, is perfect for jobs that require the lifting of materials without the need for large equipment. It has guaranteed longevity because of its robust design, so at our competitive price, you can be assured that this is a worthy investment that will serve you well, no matter what you use the Dingo mini loader for.
Wacker Neuson Dingo Mini Loader – SM325-27W
Designed and manufactured exclusively for Wacker Neuson by Dingo Australia, powered by the Yanmar diesel engine, the SM325-27W is the ideal platform for worksites, owner-operators and DIY‘ers. The lean fuel burn of the Yanmar, delivers excellent fuel economy reducing running costs.
Pressure and flow to the track and your attachments are the heart of any mini loader – it’s how you earn your living. You want the very best – and that’s what a SM325-27W provides consistently – day after day, year after year!
Combining the unique hydraulic design of the Wacker Neuson mini-loader with the Yanmar engine, provides the perfect partnership of power, pressure and durability for every application.
The SM325-27W has the most robust chassis on the market – this moves the weight down to the track where you need it.
The lower center of gravity gives you best in class traction and trenching up to 30% more pull and 30% more push power.
The Wacker Neuson Dingo all-wheel drive SM325-27W is perfect for all terrains.
With the optional narrow wheel and hub set you can quickly change your set up to narrow access whenever you need – as narrow as 780 mm – eliminating the need for a second machine.
Achieve more with the best and highest lift for the weight class. Our proven bushing system has no steel on steel wear – which means no grease no mess resulting in less maintenance and longer machine life!
Protected by our touch powder-coated finish, your SM325-27W will stand up against the harshest of conditions.
Wacker Neuson SM325-27W made by Dingo Australia, working as hard as you do!
View Spec Sheet at WackerNeuson.com
Benefits of Dingo Mini Loaders
Dingo mini loaders have a low centre of gravity, meaning they have outstanding traction and trenching, with up to 30% more pull and 30% more push power. It has been designed using an innovative bushing system that has no steel on steel wear, so there is no need for grease to be used. This saves money and mess, with lower maintenance needs while increasing the machine life. Plus, with the touch powder-coated finish, it can withstand tough weather conditions.
Frequently Asked Questions
What can a mini loader do?
Mini loaders are perfect for any job that requires earthmoving and soil levelling, but unlike a larger excavator, they can easily access smaller terrain, so they are more versatile. They can be used for both indoor and outdoor projects of any size and can come with both wheels and tracks depending on the terrain they are intended for.
Are mini loaders easy to use?
Unlike an excavator, you stand up while operating a mini loader. This means you have good visibility around the machine, making it easy to see what you are doing. It only has four controls – drive, steer and two to operate the attachment. This is quite simple to pick up with some practice.
How much can a Dingo mini loader lift?
The rated lift capacity of a Dingo mini loader is 325 kg. The dump height of the standard bucket is 1450 mm.
Where can I collect this item?
Click and collect is available for the Dingo mini loader in Mackay. We can also ship Australia-wide for a shipping fee, both express and standard.
How can I find out more?
It’s easy to find out more, including payment and delivery options, by calling the Southern Cross Industrial Group Pty Ltd friendly team on +61 7 4842 9800 today. You can also read customer reviews on the product page.
-
Wacker Neuson PT3H – 5KW 6.8HP Diesel Self Priming Trash Pump
View productWacker Neuson PT3H – 5KW 6.8HP Diesel Self Priming Trash Pump
The PT 3 series of self-priming, centrifugal trash pumps have proven themselves on job sites around the world. The high-performance, durable pumps can move up to 400 gpm (1515 l/m) and solids up to 1.5 inches (38mm). With the radial flow design, quality components and built-in contractor friendly features these pumps have redefined the durability standards of a job site pump. The PT 3 series is popular for general dewatering of excavations, flooded basements, manholes, utility vaults, mining work, swimming pools, lakes and barge holds or wherever there is unwanted water.
Features:
- Hardened ductile iron impeller and volute with patented pump cover, volute and volute insert provides a rugged, easy to maintain pump that will stay on the job longer
- Compact, lightweight design using high strength aluminum housing with easy access and large fill and drain plugs, provides extra years of trouble-free operation
- Radial flow design produces high volume and head for superior pump performance
- Quality components such as carbon ceramic mechanical seals for extra long life
- Easy to operate. Available with gasoline or diesel engine options
-
Wacker Neuson PSA2 500 2″ Submersible Pump
View productWacker Neuson PSA2 500 2″ Submersible Pump
Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.- Lightweight, compact design for easy transport and positioning of pump
- Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs
- Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs
- Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor
- Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection
- Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid
- Semi-vortex impeller allows for optimum wear resistance
- The necessary water level to operate the pump is 4-1/2″ from the bottom of the pump
View Spec Sheet online at WackerNeuson.com
-
Wacker Neuson PCV45A 1.3HP Portable Concrete Vibrator 45mm Head Honda Petrol Engine
View productWacker Neuson PCV45A 1.3HP Portable Concrete Vibrator 45mm Head Honda Petrol Engine
Productivity and long service life: these are the outstanding characteristics of the WACKER NEUSON concrete vibrator range. Even under the toughest applications, WACKER NEUSON concrete vibrators will convince with an all-round consistently high compaction performance and ease of operation.
Features:
- Honda GX35 4 stroke petrol engine,
stage 5 - Operating functions at the fingertips
- Full spiral protection of the flexible shaft
- Lightweight with shoulder strap included
Specifications:
- Engine: Honda GX35
- Output: 1.0kW/ 1.3Hp
- RPM: 9200rpm
- Total Length: 2139mm
- Flex Shaft Length: 1024mm
- Head Diameter: 45mm
- Head Length: 380mm
- Honda GX35 4 stroke petrol engine,
-
Wacker Neuson MCT36-5 4.1kW 915mm (36″) 4 Blade Walk-Behind Concrete Trowel
View productWacker Neuson MCT36-5 4.1kW 915mm (36″) 4 Blade Walk-Behind Concrete Trowel
Safety in the workplace is a paramount issue with run away trowels increasing the potential of injury to workers and damage to the tool and workplace. Wacker Neuson has been developing walk-behind trowels for the past 30 years, offering a plethora of experience in trowel safety.
Designed and built with the most advanced technology, these walk- behind trowels offer high quality concrete finishing plus added operator safety. The patented gearbox brake, patented gyroscopic safety sensor and patent-pending engine speed limiter provide triple protection for the operator. This unique system minimizes a runaway handle situation.
- Features:
- Ideal for areas less than 500 square meters reducing the time required to finish the job
- Equipped with height adjustable “whale tail” trowel handle for ergonomic operation
- Powered with reliable and powerful four stroke gasoline engine
- Variable speeds: lower speeds for floating, higher speeds for finishing
- Adjustable pitch knob for changing the blade angle
- Throttle control located on the handle for adjusting blade speed
- Integrated lift point for job site manoeuvring
Specifications
- Max rated power at rated speed: 4.1 kW (5,5 HP) @ 3,600 rpm
- Troweling Diameter: 915mm(36″)
- Blades: 4
- Speed Range: 60-125rpm
- Pitch Range: 0 – 15°
- Engine Type: Air-cooled, 4-cycle, single cylinder, petrol
- Engine: Loncin G200F
- Displacement: 196 cm3
- Fuel Consumption: 1.2l/h
- Fuel Tank Capacity: 3.6l
- Engine Oil Capacity: 0.6l
- Dimensions (L x W x H): 1820mm x 945mm x 980mm
- Weight: 83kg
Warranty:
- 5 Years Warranty Covered By Wacker Neuson Australia
- Features:
-
Wacker Neuson DS70 3.1kW Diesel Industrial Vibratory Rammer
View productWacker Neuson DS70 3.1kW Diesel Industrial Vibratory Rammer
Wacker Neuson’s diesel rammer completes your diesel fleet. The DS70 is a well-balanced machine with low CO emissions and compact dimensions. It is ideally suited for the compaction of cohesive, mixed and granular soils.
- The diesel engine is the most environmentally friendly rammer engine available, which makes it the perfect choice for compaction jobs in poorly ventilated trenches.
- The noise reducing cover lowers the amount of engine and shoe noise transmitted to the operator.
- The large capacity and corrosion-proof fuel tank is equipped with a self cleaning in-tank filter. That means long service life and minimum maintenance.
- For added operator convenience, a single lever controls start-up, speed and engine shut-off.
- The highly engineered built-in shock mount system of the guide handle reduces hand-arm vibration (HAV) and thus improves user comfort.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson BTS635s 350mm (13-3/4″) Petrol Concrete Cut-Off Saw
View productWacker Neuson BTS635s 350mm (13-3/4″) Petrol Concrete Cut-Off Saw
The gasoline cut-off saws of the BTS range are your ideal companions on site. They are extremely durable and robust thanks to high quality manufacturing standards of their individual components. The design is perfectly balanced, making for easy and intuitive operation of the device. The air-cooled two-cycle engine has a high torque with reliable power transmission.This ensures the first-class cutting performance of the BTS range. And they remain easily within all specified emission limits.
- First-class cutting performance
- Way above average operating times
- High performance engine with high torque.
- Robust high quality construction
- Hand-arm vibrations below 5m/s²*
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson BS50-2plus 2kW 2-Stroke Plus Series Vibrator Rammer
View productWacker Neuson BS50-2plus 2kW 2-Stroke Plus Series Vibrator Rammer
The two-stroke rammers of the Plus-Series provide all the advantages of the classical two-stroke rammers and additionally offer a practical work facilitation as a plus: By two separate tanks for fuel and two-stroke oil the pre-mixing is no longer necessary. Both liquids are filled in separately and the oil lubrication system automatically generates the correct mixing ratio. For more safety the oil tank can be locked (accessory). This avoids a wrong refueling. The rammers of the Plus-Series are available in three weight classes. The low center of gravity provides strong propulsion and great stability. This prevents tilting and facilitates the operation of the rammer.
- Extra-large oil tank: refueling only after 120 working hours
- Low hand-arm vibrations thanks to a special spring-loaded guide handle
- Comfortable operation with auto-choke and only one lever for idling, starting and stopping
- Slim design for compaction jobs in narrow trenches
- Automatic shutdown after 10 minutes of idle operation or when starting with an empty oil tank
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson MP70 Single Direction Vibratory Plate
View productWacker Neuson MP70 Single Direction Vibratory Plate
With a powerful Wacker Neuson petrol engine, low weight, compact dimensions and low-maintenance design, the MP70 Vibratory Plate is ideal for the compaction of sand, crushed rock, granular materials and segmental brick paving.
- Compact design with centrally mounted, fully enclosed exciter for an even spread of compaction force over the whole base plate.
- Sturdy 4-stroke petrol engine with recoil starter is isolated from vibration by rubber dampers.
- Vibration isolated reversible handle with throttle control for ease of operation and reduced operator fatigue.
- Conveniently placed lifting handles, and a central lifting point for safe and easy handling.
- Low maintenance design.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson PT3A 6kW 75mm Petrol Trash Pump
View productWacker Neuson PT3A (5100042614) 6kW 75mm Petrol Trash Pump
Wacker Neuson’s centrifugal pumps are the first choice for contractors and professionals.
Centrifugal pumps designed to keep your job site dry. With its radial flow design and built-in contractor friendly features, this line of trash pump has redefined the quality and durability standards of self-priming centrifugal trash pumps. These 3-inch trash pumps can handle solids up to 38mm. The newly-released PT 3He is a fully bunded ?mine spec? pump that builds on the solid foundation of other PT pumps with electric start, emergency stop and fully insulated electrics.
FOR FREE CLICK AND COLLECT PLEASE CALL OUR OFFICE ON (07) 4842 9800 TO AVOID SHIPPING FEES.
-
Wacker Neuson PT2A 4kW 50mm Petrol Trash Pump
View productWacker Neuson PT2A (5100042613) 4kW 50mm Petrol Trash Pump
Wacker Neuson is a well-established company known for their light construction equipment and associated services.
These centrifugal trash pumps have proven themselves on job sites around the world. Pumps feature hardened ductile iron impeller and volute with patented pump cover, volute and volute insert providing a rugged, easy to maintain pump that will stay on the job longer. Units can handle solids up to 25mm.
The PT 2 series of centrifugal trash pumps are reliable dewatering tools for a variety of applications. The lightweight pumps can handle up to 210 gpm (795 l/m) and solids up to one inch (25 mm) and are ideal for general dewatering of excavations, flooded basements, manholes, utility vaults, mining work, swimming pools, lakes and barge holds or wherever there is unwanted water. With the radial flow design and built-in contractor friendly features, this line of trash pumps has redefined the quality and durability standards of self-priming, centrifugal trash pumps.
Features:
Hardened ductile iron impeller and volute with patented pump cover, volute and volute insert provides a rugged, easy to maintain pump that will stay on the job longer.
Compact, lightweight design using high strength aluminum housing with easy access and large fill and drain plugs, provides extra years of trouble-free operation
Radial flow design produces high volume and head for superior pump performance.
Quality components such as carbon ceramic mechanical seals for extra long life.
Easy to operate. Available with gasoline or diesel engine options.
HEAVY ITEM:Â CLICK AND COLLECT AT CHECKOUT TO AVOID SHIPPING COSTS.
