Express Shipping Australia Wide
Proudly Australian Owned & Operated
All The Best Brands AvailableWelding & Construction
Showing 1–51 of 63 results
-
Metrinch 25pce Standard Socket Set 1/4, 3/8 drive
$216.95 incl. GST Add to cartAbout this item:
– This 25 piece set equals a 53 piece conventional set
– 1/4″ Accessories: 150mm Spinner Handle, 3/8″ & 1/4″ Adaptor, 50mm Extension Bar, Universal Joint & Finger Ratchet
– 3/8″ Accessories: 16mm & 21mm Spark Plug Sockets, Quick Release Reversible Ratchet, 150mm Extension Bar & Universal Joint; Size Range: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 19, 20, 21, 22mm
– Metrinch’s patented Wall Drive allows the wrench to grip a much larger wall surface of the fastener and also each tool can be used for both metric and imperial, plus damaged nuts and bolts
– All Metrinch tools are forged from high grade chrome vanadium steel for lifetime use -
Metrinch 14pce Spanner Set
$193.95 incl. GST Add to cartAbout this item:
– This 14 piece set equals a 45 piece conventional set
– Size Range: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23mm
– Supplied in roll up tool pouch
– Metrinch’s patented Wall Drive allows the wrench to grip a much larger wall surface of the fastener and also each tool can be used for both metric and imperial, plus damaged nuts and bolts
– All Metrinch tools are forged from high grade chrome vanadium steel for lifetime use -
Wacker Neuson DPU4045Yehzf 4.9kW Diesel Reversible Vibratory Plate
$12,400.00 incl. GST Add to cartWacker Neuson DPU4045Yehzf 4.9kW Diesel Reversible Vibratory Plate
Thanks to its excellent compaction force combined with a quick forward and reverse travel direction, the DPU4045 offers a high level of productivity. It is equipped with a Yanmar diesel engine and is an all-rounder for all job sites where high demands are placed on the performance efficiency of a unit. In addition, it offers excellent characteristics in terms of service life and operating comfort. Optimal application areas are the compaction of frost coverings and subbases in street, path and parking lot construction as well as backfilling buildings. Thanks to a frequency of 69 Hz, the DPU4045 is universally applicable and even reliably compacts medium-weight interlocking paving stones.- The new center pole reduces hand-arm vibration (HAV) to a minimum and therefore offers a high level of comfort at full compaction performance. No restriction for operation time and no documentation effort.
- A dead man function prevents the operator from being trapped between the equipment and an object when working in reverse.
- All maintenance points are quickly and easily accessible. Extensive comfort functions: low oil shutdown, self-tightening V-belt, maintenance-free alternator, pull-out external jump-start connection accessible from outside.
- A large dimensioned Yanmar diesel engine offers sufficient power reserves. It ensures efficiency and long service life.
- New positioning of the operator’s controls in a sturdy housing — better protection against dirt and damage.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson BFS Floor Saw
Read moreWacker Neuson BFS Floor Saws
The gasoline-driven floor saw series by Wacker Neuson is particularly characterized by its superior cutting performance. All model versions are up to 20 percent faster than comparable devices so that the BFS series offers the highest cutting speed with a quiet operation. This is because the torque that is transmitted to the diamond blade and the center of gravity that is above the cutting shaft are efficiently adapted to each other. And this with a low weight, because the BFS series is the lightest in its class.- Low hand-arm-vibrations below 5 m/s²
- Superior cutting performance: Up to 20 % faster than comparable devices
- Requires very little maintenance due to lifetime-lubricated bearings
- High directional stability through the high tensile strength frame and ball-bearing wheels
- Variably adjustable cutting depth
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson Drive Unit HD3.7 MIV FWP SP Petrol – HD3.7
$1,080.00 incl. GST Add to cartWacker Neuson Drive Unit HD3.7 MIV FWP SP Petrol – HD3.7
The HD3.7 drive unit from Wacker Neuson is a perfectly designed, simple to use, multipurpose drive unit which the competition have been attempting to copy for decades. These drive units have been manufactured by Wacker Neuson for over 40 years. They are designed to run both pumps and a range of vibrators, making them the prefect addition to any construction site.
Features:
- Reliability
- Wacker Neuson has been making construction equipment for over 160 year with proven engineering experience.
- Powered by a Genuine Honda engine.
- Versatility
- Universal design allows for use with products from other manufacturers.
- Drives vibrators from 25mm to 60mm.
- Drives submersible pumps.
- Extensions available.
- Ease of use
- Dished steel base for ease of transport over concrete reinforcing mesh.
- Universal 3 dog coupling works with all reputable manufacturers.
- Safety
- Light weight construction.
- Ergonomically designed roll cage for lifting.
- Central lifting point for crane use. Starter rope is positioned so if the plate takes off on starting it will take off away from the operator.
- Maintenance
- Long life dual stage air filters fitted for low maintenance.
- Cast iron bell housing for long service life.
- Robust fabricated roll bar.
- Coupling bolted to shaft, no chance of slipping or movement as found on inferior products.
- Accessories
- 25, 28, 38, 40, 57 and 60mm vibrators.
- Submersible pumps.
- Reliability
-
Wacker Neuson VPH70 Range (10-20 kN)
$1,990.00 incl. GST Add to cartWacker Neuson VPH70 Range (10-20 kN)
With a range of reliable and powerful engines, low weight, compact dimensions and low-maintenance design, the VP 70 series Vibratory Plates are ideal for compaction of sand, crushed rock, granular materials and segmental brick paving.- Compact design with centrally mounted, for an even spread of compactive force over the whole base plate.
- Sturdy 4-stroke petrol or diesel engine with recoil starter is isolated from vibration by rubber dampers.
- Vibration isolated reversible handle with throttle control for ease of operation and reduced operator fatigue.
- Conveniently placed lifting handles, and a central lifting point for safe and easy handling.
- Low maintenance design, backed by Wacker Neuson quality, reliability and product support.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson Telehandler TH412
Read moreWacker Neuson Telehandler TH412
It’s impressive how much power there is packed in the TH412 compact telehandler. The TH412 Wacker Neuson telehandler is unique in its combination of high lifting height, lean width and strong machine performance. A true multi-talent for works in municipalities, factories, building yards and at construction sites.- Equipped with the innovative VLS driver assist system (Vertical Lift System).
- Extremely small inside radius of 821 mm.
- Enormous lifting height of 4.5 m in combination with a payload of 1.2 t.
- Efficient 31 PS Yanmar engine—optional 40 PS available.
- Hydraulic quick change system for a great assortment of attachments.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson Dingo Mini Loader – SM325-27W
Read moreWacker Neuson Dingo Mini Loader – SM325-27W
Designed and manufactured exclusively for Wacker Neuson by Dingo Australia, powered by the Yanmar diesel engine, the SM375-27W is the ideal platform for worksites, owner-operators and DIY‘ers. The lean fuel burn of the Yanmar, delivers excellent fuel economy reducing running costs.
Pressure and flow to the track and your attachments are the heart of any mini loader – it’s how you earn your living. You want the very best – and that’s what a SM375-27W provides consistently – day after day, year after year!
Combining the unique hydraulic design of the Wacker Neuson mini-loader with the Yanmar engine, provides the perfect partnership of power, pressure and durability for every application.
The SM375-27W has the most robust chassis on the market – this moves the weight down to the track where you need it.
The lower center of gravity gives you best in class traction and trenching up to 30% more pull and 30% more push power.
The Wacker Neuson Dingo all-wheel drive SM375-27W is perfect for all terrains.
With the optional narrow wheel and hub set you can quickly change your set up to narrow access whenever you need – as narrow as 780 mm – eliminating the need for a second machine.
Achieve more with the best and highest lift for the weight class. Our proven bushing system has no steel on steel wear – which means no grease no mess resulting in less maintenance and longer machine life!
Protected by our touch powder-coated finish, your SM375-27W will stand up against the harshest of conditions.
Wacker Neuson SM375-27W made by Dingo Australia, working as hard as you do!
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson PT3H – 5KW 6.8HP Diesel Self Priming Trash Pump
$5,445.00 incl. GST Add to cartWacker Neuson PT3H – 5KW 6.8HP Diesel Self Priming Trash Pump
The PT 3 series of self-priming, centrifugal trash pumps have proven themselves on job sites around the world. The high-performance, durable pumps can move up to 400 gpm (1515 l/m) and solids up to 1.5 inches (38mm). With the radial flow design, quality components and built-in contractor friendly features these pumps have redefined the durability standards of a job site pump. The PT 3 series is popular for general dewatering of excavations, flooded basements, manholes, utility vaults, mining work, swimming pools, lakes and barge holds or wherever there is unwanted water.
Features:
- Hardened ductile iron impeller and volute with patented pump cover, volute and volute insert provides a rugged, easy to maintain pump that will stay on the job longer
- Compact, lightweight design using high strength aluminum housing with easy access and large fill and drain plugs, provides extra years of trouble-free operation
- Radial flow design produces high volume and head for superior pump performance
- Quality components such as carbon ceramic mechanical seals for extra long life
- Easy to operate. Available with gasoline or diesel engine options
-
Wacker Neuson PSA2500 2″ Submersible Pump
Read moreWacker Neuson PSA2500 2″ Submersible Pump
Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.- Lightweight, compact design for easy transport and positioning of pump
- Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs
- Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs
- Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor
- Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection
- Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid
- Semi-vortex impeller allows for optimum wear resistance
- The necessary water level to operate the pump is 4-1/2″ from the bottom of the pump
View Spec Sheet online at WackerNeuson.com
-
Wacker Neuson PCV45A 1.3HP Portable Concrete Vibrator 45mm Head Honda Petrol Engine
Read moreWacker Neuson PCV45A 1.3HP Portable Concrete Vibrator 45mm Head Honda Petrol Engine
Productivity and long service life: these are the outstanding characteristics of the WACKER NEUSON concrete vibrator range. Even under the toughest applications, WACKER NEUSON concrete vibrators will convince with an all-round consistently high compaction performance and ease of operation.
Features:
- Honda GX35 4 stroke petrol engine,
stage 5 - Operating functions at the fingertips
- Full spiral protection of the flexible shaft
- Lightweight with shoulder strap included
Specifications:
- Engine: Honda GX35
- Output: 1.0kW/ 1.3Hp
- RPM: 9200rpm
- Total Length: 2139mm
- Flex Shaft Length: 1024mm
- Head Diameter: 45mm
- Head Length: 380mm
- Honda GX35 4 stroke petrol engine,
-
Wacker Neuson MCT36-5 4.1kW 915mm (36″) 4 Blade Walk-Behind Concrete Trowel
$1,595.00 incl. GST Add to cartWacker Neuson MCT36-5 4.1kW 915mm (36″) 4 Blade Walk-Behind Concrete Trowel
Safety in the workplace is a paramount issue with run away trowels increasing the potential of injury to workers and damage to the tool and workplace. Wacker Neuson has been developing walk-behind trowels for the past 30 years, offering a plethora of experience in trowel safety.
Designed and built with the most advanced technology, these walk- behind trowels offer high quality concrete finishing plus added operator safety. The patented gearbox brake, patented gyroscopic safety sensor and patent-pending engine speed limiter provide triple protection for the operator. This unique system minimizes a runaway handle situation.
- Features:
- Ideal for areas less than 500 square meters reducing the time required to finish the job
- Equipped with height adjustable “whale tail” trowel handle for ergonomic operation
- Powered with reliable and powerful four stroke gasoline engine
- Variable speeds: lower speeds for floating, higher speeds for finishing
- Adjustable pitch knob for changing the blade angle
- Throttle control located on the handle for adjusting blade speed
- Integrated lift point for job site manoeuvring
Specifications
- Max rated power at rated speed: 4.1 kW (5,5 HP) @ 3,600 rpm
- Troweling Diameter: 915mm(36″)
- Blades: 4
- Speed Range: 60-125rpm
- Pitch Range: 0 – 15°
- Engine Type: Air-cooled, 4-cycle, single cylinder, petrol
- Engine: Loncin G200F
- Displacement: 196 cm3
- Fuel Consumption: 1.2l/h
- Fuel Tank Capacity: 3.6l
- Engine Oil Capacity: 0.6l
- Dimensions (L x W x H): 1820mm x 945mm x 980mm
- Weight: 83kg
Warranty:
- 5 Years Warranty Covered By Wacker Neuson Australia
- Features:
-
Wacker Neuson DS70 3.1kW Diesel Industrial Vibratory Rammer
$5,200.00 incl. GST Add to cartWacker Neuson DS70 3.1kW Diesel Industrial Vibratory Rammer
Wacker Neuson’s diesel rammer completes your diesel fleet. The DS70 is a well-balanced machine with low CO emissions and compact dimensions. It is ideally suited for the compaction of cohesive, mixed and granular soils.
- The diesel engine is the most environmentally friendly rammer engine available, which makes it the perfect choice for compaction jobs in poorly ventilated trenches.
- The noise reducing cover lowers the amount of engine and shoe noise transmitted to the operator.
- The large capacity and corrosion-proof fuel tank is equipped with a self cleaning in-tank filter. That means long service life and minimum maintenance.
- For added operator convenience, a single lever controls start-up, speed and engine shut-off.
- The highly engineered built-in shock mount system of the guide handle reduces hand-arm vibration (HAV) and thus improves user comfort.
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson BTS635s 350mm (13-3/4″) Petrol Concrete Cut-Off Saw
$1,555.00 incl. GST Add to cartWacker Neuson BTS635s 350mm (13-3/4″) Petrol Concrete Cut-Off Saw
The gasoline cut-off saws of the BTS range are your ideal companions on site. They are extremely durable and robust thanks to high quality manufacturing standards of their individual components. The design is perfectly balanced, making for easy and intuitive operation of the device. The air-cooled two-cycle engine has a high torque with reliable power transmission.This ensures the first-class cutting performance of the BTS range. And they remain easily within all specified emission limits.
- First-class cutting performance
- Way above average operating times
- High performance engine with high torque.
- Robust high quality construction
- Hand-arm vibrations below 5m/s²*
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson BS50-2plus 2kW 2-Stroke Plus Series Vibrator Rammer
$3,425.00 incl. GST Add to cartWacker Neuson BS50-2plus 2kW 2-Stroke Plus Series Vibrator Rammer
The two-stroke rammers of the Plus-Series provide all the advantages of the classical two-stroke rammers and additionally offer a practical work facilitation as a plus: By two separate tanks for fuel and two-stroke oil the pre-mixing is no longer necessary. Both liquids are filled in separately and the oil lubrication system automatically generates the correct mixing ratio. For more safety the oil tank can be locked (accessory). This avoids a wrong refueling. The rammers of the Plus-Series are available in three weight classes. The low center of gravity provides strong propulsion and great stability. This prevents tilting and facilitates the operation of the rammer.
- Extra-large oil tank: refueling only after 120 working hours
- Low hand-arm vibrations thanks to a special spring-loaded guide handle
- Comfortable operation with auto-choke and only one lever for idling, starting and stopping
- Slim design for compaction jobs in narrow trenches
- Automatic shutdown after 10 minutes of idle operation or when starting with an empty oil tank
View Spec Sheet at WackerNeuson.com
-
Wacker Neuson MP70 Single Direction Vibratory Plate
$1,520.00 incl. GST Add to cartWacker Neuson MP70 Single Direction Vibratory Plate
With a powerful Wacker Neuson petrol engine, low weight, compact dimensions and low-maintenance design, the MP70 Vibratory Plate is ideal for the compaction of sand, crushed rock, granular materials and segmental brick paving.
- Compact design with centrally mounted, fully enclosed exciter for an even spread of compaction force over the whole base plate.
- Sturdy 4-stroke petrol engine with recoil starter is isolated from vibration by rubber dampers.
- Vibration isolated reversible handle with throttle control for ease of operation and reduced operator fatigue.
- Conveniently placed lifting handles, and a central lifting point for safe and easy handling.
- Low maintenance design.
View Spec Sheet at WackerNeuson.com
-
Unimig SC80 Plasma Torch Retaining Cap
$73.97 incl. GST Add to cartUnimig SC80 Plasma Torch Retaining Cap – SC8030
The UNIMIG Retaining Cap is designed to hold all the consumables onto the torch head, used for standoff cutting.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Welding Helmet Lens Cover – Inner 103X47MM
$10.00 incl. GST Add to cartUnimig Welding Helmet Lens Cover – Inner 103X47MM – PUMIP
Replacement cover lenses for your welding helmet. Inner cover lenses offer protection on the surface of the Auto-Darkening Filter from scratches, heat and spatter.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig SC30 Plasma Torch Swirl Ring
$16.19 incl. GST Add to cartUnimig SC30 Plasma Torch Swirl Ring – WGSC2506
UNIMIG SC30 Swirl Rings have been designed to control and swirl the compressed air around the electrode and into the nozzle. It plays a crucial part in ensuring longer consumable life and clean-cut quality.
- Made from Vespel
- Extends consumable life
- Used for clean-cut quality
- Long Lasting Replacement
- Suits the SC30 Plasma Torch & LC25 Torch from PC210 Plasma Cutter
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig ARC Torchology® Tig Torch Gas Lens Collet Bodies
$32.02 incl. GST Add to cartUnimig ARC Torchology® Tig Torch Gas Lens Collet Bodies – UMCT2GL16
ARC TORCHOLOGY® TIG Torch Collet Bodies are designed with a highly effective series of passages to force cool the collet, maximising conductivity and extending consumable life. As a result, ARC TORCHOLOGY® TIG Torch Collet Bodies feature up to 10x longer consumable life compared to standard UNIMIG collet bodies.
Unimig T2 & T3W TIG Gas Lens Collet Body with Improved Laminar Gas Flow
- 1.6mm Gas Lens Collet Body
- Suits T2 & T3W Torches
- UMCT2GL16
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig WZ8 0.8% Zirconiated Tungsten Electrodes
$56.34 incl. GST Add to cartUnimig WZ8 0.8% Zirconiated Tungsten Electrodes – PTR0006-24
Zirconiated tungsten electrodes is most commonly used for AC welding. Zirconiated tungsten produces a very stable arc and is resistant to tungsten spitting. It is ideal for AC welding as it retains a balled tip as well as has a high resistance to contamination. It has a current-carrying capacity that is equal to or greater than that thoriated tungsten.
Features:
- Zirconiated tungsten electrodes (AWS classification EWZr-1)
- Contain a minimum of 99.10 percent tungsten and 0.15 to 0.40 percent zirconium.
- Current-carrying capacity is equal to or greater than that of thoriated tungsten.
- Zirconiated tungsten is not recommended for DC welding.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Binzel Style Contact Tips – 6 pack
$11.23 incl. GST Add to cartUnimig Binzel Style Contact Tips – PCT0008-09
UNIMIG Binzel style contact tips are designed with a solid copper construction for increased conductivity and spatter resistance, this leaves you with a cleaner finish and improved life of your contact tip
Suits
- MIG Torch: SB36 & SB38
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Aluminium Tig Welding Rods 5356
$33.24 incl. GST Add to cartUnimig Aluminium Tig Welding Rods – AT5356-1.6-1KG
UNIMIG 5356 Aluminium TIG Welding Rods are a triple shaved TIG wire for the purpose of welding cats and wrought aluminium and specifically the 3000, 5000 & 6000 series. The wire has excellent weldability and corrosion resistance.
5356 is sometimes referred to as “marine grade” as it is widely used in the marine industry and it’s very commonly found in general fabrication applications as well. The major element in 5356 wire is 5% magnesium.
Features:
- High Quality
- Triple Shaved
- X-Ray Quality
- Low Fume Factor
- Cleaner Welds
Approvals
-
- AWS
- ABS
- CWB
- Lloyds Register
- DNV
- TUV
- DB
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig ER70S-6 Mild Steel Mig Wire
$223.12 incl. GST Add to cartUnimig ER70S-6 Mild Steel Mig Wire – MS.9B
UNIMIG ER70S-6 is a high quality, copper coated, triple de-oxidised solid MIG welding wire supplied on 15kg / 5kg and 1Kg Plastic Spools. UNIMIG ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding. It is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires.
Applications:
- Structural Steel – General Fabrication – Light Fabrication
- Transport Industry -Heavy Equipment – Farm Machinery
- Pressure Vessels – Robotic and Semi Automatic Welding Applications
Features:
- Higher levels of manganese and silicon than most standard grades of MIG wire.
- High silicon content for a smoother bead appearance and and minimal post-weld grinding.
- Porosity-free, x-ray quality welds with high tensile strength
- High Quality
- Triple De-oxidised
- X-Ray Quality
- Precision Layer Wound
- Smooth Feeding
- Clean Weld Finish
- International Approvals
- ER70S-6
- AS/NZS 2717.1:ES6 – CG – W503H
- APPROVALS 5KG AND 15 KG SPOOLS
- LLOYDS REGISTER
- DET NORSKE VERITAS
- AMERICAN BUREAU OF SHIPPING
- GERMANISCHER LLOYD
- CANADIAN WELDING BUREAU
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Hyperarc 16TC Low-Hydrogen Electrodes
$144.47 incl. GST Add to cartUnimig Hyperarc 16TC Low-Hydrogen Electrodes – U63008
The HYPERARC 16TC, Twin Coated 7016 Low Hydrogen electrode offers total performance and features excellent arc stability, low spatter levels and easy slag removal. With its all positional capabilities (except vertical down) it is the optimum choice when high quality welding is required. Suitable for structural, earth moving equipment, maintenance, and piping. The Hyperarc 16TC electrode will cover every job you need where quality and performance matter.
Features:
- Excellent arc stability
- High penetration
- Less spatter and easy releasing slag
- Concentrated arc
Applications:
- Structural Steel Fabrication
- Pressure Vessel welding
- Pipe welding
- Repair work for Agriculture and machinery
- Earthmoving equipment repairs
- Layering, “Buttering”
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig 4M ARC Welding Lead Set
$62.31 incl. GST Add to cartUnimig 4M ARC Welding Lead Set – LS16-35/50-1
The UNIMIG 4m Arc Welding Lead Set consists of an electrode holder and earth clamp along with their appropriate leads, fully assembled and ready for use. It is designed to hold electrodes firmly in 45°, 90° or 180° positions, to assist in various types of welding practice. The electrode holder has a heavy-duty, fully insulated handle for high conductivity, and improved cable connections for optimal performance and reliability. The earth clamp is designed with copper and brass jaw pads for optimum conductivity, providing you with a strong, positive electrical connection.
- Premium twist-lock electrode holder
- Australian industrial-standard welding cable
- Double insulated flexible welding cable
Includes:
- 1 x 4m cable
- 1 x 400amp electrode holder
- 1 x 300amp earth clamp
- 1 x 35/50 connector
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Earth Clamps
$7.85 incl. GST Add to cartUnimig Earth Clamps – EC200
UNIMIG Earth Clamps are designed with copper and brass jaw pads for optimum conductivity, this provides a strong, positive electrical connection.
Features:
- Strong copper and brass jaw pads
- Consistent positive electrical connection
- Strong clamping force
- Easy to connect and disconnect
- comfortable grip
- holds strong earth in all positions
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Small Machine Welding Trolley
$81.97 incl. GST Add to cartUnimig Trolley to Suit MIG Inverters – UMJRTROLLEY2
The UNIMIG Small Machine Welding Trolley is ideal if you are tired of moving your welding and gas gear around the workshop manually. With easy setup, the small machine trolley can perfectly fit your setup, while also holding a D or E size gas cylinder on the back. An upward angle on the top also ensures that you can easily change the settings on your welder on the fly, and the middle shelf can be used for accessories. Made from a sturdy metal construction, free-moving front castor wheels and solid rear rubber wheels means you will get a long lifespan from this trolley.
Suits smaller machines.
- Sturdy metal construction
- Top shelf angled to change welding settings on the fly
- Built-in middle shelf for welding accessories
- Suitable for D and E size gas cylinders
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Gas Welding Goggles
$41.09 incl. GST Add to cartUnimig Gas Welding Goggles – UFGOG
UNIMIG Gas Welding Goggles protect your eyes from radiation, splashes and other flying particles. With other added features such as our vented design to prevent fogging and soft PVC frame, they are comfortable to wear for long periods of time. When the shaded lenses are flipped up the user is still protected by a set of clear lenses. This also saves having to remove them in-between welding, brazing and cutting operations.
Made with a one piece polycarbonate lens which is great for gas welding, cutting and brazing. Not only protecting your eyes from splashes and flying particles, but also limiting radiation.Features- For Oxygen / Acetylene / LPG / Propane.
- Rated to shade 5
- Lift up lens and vents to give good visibility before you weld while fitting over prescription or safety glasses.
- Only suitable for gas welding.
- Soft pliable frame comfortable to wear.
- Non reflective matt interior finish.
- Vented to prevent fogging.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Gas Cutting Attachment
$98.78 incl. GST Add to cartUnimig Gas Cutting Attachment – UF3CA
UNIMIG Gas Cutting Attachment is compatible for both Type 41 (Oxygen/LPG) tips. It features locking teeth for secure positioning and a solid brass construction resulting in a durable frame that can also withstand high temperatures. The design also prevents any harmful flashbacks.
Features:
- UNIMIG Gas Cutting Attachment is compatible for both Type 41 (Oxygen/Acetylene) and Type 44 (Oxygen/LPG) tips.
- It features locking teeth for secure positioning.
- Solid brass construction resulting in a durable frame that can also withstand high temperatures.
- The design also prevents any harmful flashbacks.Suits all TYPE 41 and TYPE 44 cutting tips.
- Cuts up to 150mm plate.
- High quality needle valve for fast and accurate flame adjustment.
- O-ring seal to form a perfect gas-tight seal.
- Press lever for easy cutting use.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Welding Curtain
$66.74 incl. GST Add to cartUnimig Welding Curtain – XARWC
The UNIMIG Welding Curtain is used as a transparent screen to protect people from welder’s flash and dangerous ultraviolet rays. The UNIMIG Welding Curtain gives the welder less light glare and works perfectly in any environment, inside or outside. It features four reinforced eyelets for secure mounting, and is made with long-lasting fire-resistant material that will not crack or harden overtime.
Features:
- Specially formulated cinyl 16 mil
- 0.4mm thick to meet CE standards and Aus NZ safety requirements
- Screens are transpararent and resistant to UV rays, flame and abrasion
- Kevlar sewn and grommets at 270mm intervals
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Rogue™ Welding Jacket
$54.75 incl. GST Add to cartUnimig Rogue™ Welding Jacket – UMBJ-M
The ROGUE™ PROBAN® Welding Jacket is well-ventilated, comfortable and an ideal jacket for light-duty welding applications even in hot conditions. The Proban material is light and ventilates easily, increasing comfort in hot conditions. The cuffs are easily adjustable with buttons, whereas Kevlar thread enhances the durability of the jacket. The UNIMIG ROGUE Proban Welding Jacket is designed for extended use in hot conditions, allowing you to get on with the job. Proban flame retardant fabric will char and self extinguish when it comes into contact with a flame or spark. There is no smouldering or afterglow therefore providing protection for the wearer.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Rogue Heavy Duty Welding Gloves
$168.26 incl. GST Add to cartUnimig Rogue Heavy Duty Welding Gloves – UMWG8
The ROGUE™ Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. Made from heat and flame-resistant premium split cowhide and high-strength Kevlar stitching. The standard feature of these gloves include a full sock lining for added comfort, a reinforced palm with welted seams for added durability and comfort where and when you need it most.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Welding Goggles
$195.00 incl. GST Add to cartUnimig Welding Goggles – U21001K
The UNIMIG Welding Goggles provide protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, the Goggles provide 5-13 Shade control as well as GRIND mode for use when grinding. The UNIMIG Welding Goggles feature ELITEVISION™ Lens Technology, ensuring you always get a clear and natural view of your surroundings and workpiece.
The UNIMIG Welding Goggles have been designed to be versatile in their usage. There is room under the mask to fit an Elipse® Half-Mask P2 Respirator. The mask itself can also be removed so that only the goggles can be used. In addition, the goggles also feature an alternate elastic headband, giving you multiple options to wear the goggles as desired.
It is suitable for MIG, TIG (Minimum 5A) and STICK welding, as well as plasma cutting.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Chaos™ Welding Helmet
$165.00 incl. GST Add to cartUnimig Chaos™ Welding Helmet – UM-H-CHAOS
The CHAOS™ Automatic Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 4 arc sensors, the CHAOS™ Welding Helmet features 9-13 Shade control as well as GRIND mode for use when grinding. A 100x60mm view allows for large view of the work area, while a replaceable backup battery improves the performance of the auto-darkening filter. It is suitable for MIG, TIG (Minimum 3A) and STICK welding, as well as plasma cutting.
The CHAOS™ Welding Helmet comes with ELITEVISION™ Lens Technology to ensure you always get a clear and natural view of your surroundings and workpiece.
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Unimig Toxic Welding Helmet
$110.00 incl. GST Add to cartThe TOXIC Automatic Welding Helmet provides protection to your face and eyes from spatter and UV/IR radiation. Fitted with 2 arc sensors, the TOXIC Welding Helmet features 9-13 Shade control as well as GRIND mode for use when grinding. It is suitable for MIG, TIG (Minimum 5A) and STICK welding, as well as plasma cutting.
The TOXIC Welding Helmet comes with ELITEVISION™ Lens Technology to ensure you always get a clear and natural view of your surroundings and workpiece.
-
Unimig Razor Cut 45 Plasma Cutter
$1,360.00 incl. GST Add to cartThe RAZOR™ CUT 45 is the perfect plasma cutter for the professional who wants a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is made for the workshop and worksite. The RAZOR™ CUT 45 boasts some serious cutting power with 16mm clean cut and 20mm severance.
-
Unimig Oxygen And LPG Gas Kit
$510.00 incl. GST Add to cartOur Oxygen and LPG Gas Kit includes everything you need for general purpose gas cutting and welding. Each kit comes in a carry-all tool box and has been engineered for safety and quality that you know you can rely on.
- More than 20 cutting and welding equipment and parts
- Tough PVC tool box
- Compliant with Australian Standards
-
Unimig Oxygen And Acetylene Gas Kit
$490.00 incl. GST Add to cartOur Oxygen and Acetylene Gas Kit includes everything you need for general purpose gas cutting and welding. Each kit comes in a carry-all tool box and has been engineered for safety and quality that you know you can rely on.
- More than 20 cutting and welding equipment and parts
- Tough PVC tool box
- Compliant with Australian Standards
-
Unimig Razor 250 Compact Mig/Tig/Stick Welder
$1,950.00 incl. GST Add to cartUnimig Razor 250 Compact Mig/Tig/Stick Welder – KUMJR250K-SG
The RAZOR™ 250 Compact is a powerful workshop machine with MIG, TIG and STICK welding functions. Built with solid construction, this machine is designed to withstand the toughest conditions. The RAZOR™ 250 Compact is also Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size.
The RAZOR™ Compact series is designed for superior performance, offering the highest quality of welds from UNIMIG’s range.
- 240V Single-Phase
- Gas-shielded & Gasless MIG / Lift Arc DC TIG / STICK
- Geared Wire Drive
- Spool Gun Ready
- Push-Pull Gun Ready
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Razor 200 AC/DC Tig Welder
$1,780.00 incl. GST Add to cartThe RAZOR™ 200 AC/DC gives you full control over High Frequency AC/DC TIG welding for incredible results from start to finish. Fitted with a portable 15 AMP plug and Pulse TIG functions, this is your go-to professional unit that works a treat on any worksite.
Tailor your TIG settings with a wide range of controllable parameters including Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas Time.
The all-new ARC TORCHOLOGY T2 TIG Torch comes standard with the RAZOR™ 200 AC/DC, offering up to 30% better power-to-weight ratio and longer consumable lifecycles. A Remote Foot Control can also be plugged into the machine for even more versatility.
-
Razor ARC 180 Stick Welder
$396.00 incl. GST Add to cartThe RAZOR™ ARC 180 is the perfect STICK and TIG welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is designed to be taken between the workshop and worksites. Connecting a 17V TIG Torch provides DC Lift Arc TIG functionality.
-
Razor ARC 140 Stick/Tig Welder
$385.00 incl. GST Add to cartThe RAZOR™ ARC 140 is the perfect STICK and TIG welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 10 AMP plug, this machine is designed to be taken between the workshop and worksites with ease. Connecting a 17V TIG Torch provides DC Lift Arc TIG functionality.
-
Razor 200 Mig/Stick Welder
$1,185.00 incl. GST Add to cartThe RAZOR™ 200 is the perfect MIG and STICK welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is designed for the workshop and for site work. The Spool Gun connection gives you the added flexibility of using softer wires and smaller spools, giving you all the features you need in a lightweight machine.
-
Razor 175 Mig/Stick Welder
$899.00 incl. GST Add to cartThe RAZOR™ 175 is the perfect MIG and STICK welder for the professional welder wanting a powerful machine with a portable body. Fitted with a 15 AMP plug, this machine is designed for the workshop and for site work. The Spool Gun connection gives you the added flexibility of using softer wires and smaller spools, giving you all the features you need in a lightweight machine.
-
Viper Cut 30 Plasma Cutter
$599.95 incl. GST Add to cartThe all-new VIPER™ CUT 30 plasma cutter is specifically designed for the DIY enthusiast. Fitted with a 10 AMP plug, it’s never been easier to set up a plasma cutter at home or in your workshop.
Bigger doesn’t always mean better – a more effective output has allowed the VIPER™ CUT 30 to clean cut up to 12mm Mild Steel.
-
Viper 185 Mig/Tig/Stick Welder
$835.00 incl. GST Add to cartThe VIPER™ 185 is the ultimate multi-process welder for the DIY enthusiast. MIG, TIG or STICK, the VIPER™ does it all, and it’s ready to go anywhere you have a standard 10-amp outlet. Get repairs done and see your projects come together in record time with the ability to change modes with the flick of a switch.
The VIPER™ 185 is the perfect solution for those looking for insane performance without needing to blow your budget on multiple welders.
-
Unimig Viper 120 Synergic Mig Welder
$340.00 incl. GST Add to cartWelding has never been easier with the VIPER™ 120 SYNERGIC. Simply set your wire size, adjust the Synergic power knob and the VIPER™ does the rest! Running off a 10 AMP plug, this machine is perfect for small repairs and DIY welding projects.
The VIPER™ 120 SYNERGIC features MIG programs for 0.6mm, 0.8mm and 0.9mm wire. It can take Flux-Cored, Mild Steel and Stainless Steel MIG wires.
The built-in 10 AMP Plug makes this the perfect welder for your home workshop or out on the field. Weighing just 5.2kg, you’ll be able to take the VIPER™ 120 SYNERGIC anywhere you need.
-
Unimig Viper ARC 140 Stick Welder
$255.00 incl. GST Add to cartUnimig Viper ARC 140 Stick Welder – KUMJRVA140
The VIPER 140 is a new generation, low cost welding machine produced using the latest in IGBT inverter technology. Designed to meet the needs of the price conscious non-commercial user without compromising on quality, this machine is as reliable and robust as you would expect a machine bearing the UNIMIG name to be. The DC MMA welding function delivers a smooth and incredibly stable arc allowing easy welding with electrodes producing high quality welds including cast Iron, stainless steel and low hydrogen. The VIPER 140 is also equipped with Scratch Start DC TIG capability and connection of the 17V TIG torch allows DC TIG welding of steel, stainless steel, bronze and copper. The unique electronic design structure and air channel design in this machine speeds up the heat disapation improving the duty cycle of the machine. The unique air channel design also effectively reduces dust ingestion by the fan, dust build up and absorbtion by the electronic circuits and power device is minimised thereby improving the reliability of the machine. The VIPER 140 is an exceptional machine for the price and is suitable for a wide range of applications including light fabrication and farming. The VIPER 140 offers great portability with the power to get the job done and with the convenience of being fitted with a 10 amp domestic plug. Manufactured in compliance to AS/NZ60974.1.
Includes:
- 1 x Viper Arc 140 DC MMA/ Scratch Start TIG Power Source
- 1 x 3 metre Arc Welding lead set including tong type electrode holder & 200 Amp earth clamp
- 1 x Instruction Manual
Features:
- Latest IGBT inverter technology
- MMA (stick electrode)
- Hot start (improves electrode starting)
- Arc Force (boosts current to prevent electrode extinguishing)
- Excellent arc stability with all electrodes
- DC Scratch start TIG, basic DC TIG application
- Thermal overload protection
- IP21S rating for environmental/safety protection
- Generator compatible (recommend 6.5 KVA minimum)
- Tolerant to variable power supplies
- Fitted with and approved to use domestic 10 amp plug
More Unimig Welding Products available in store! Contact Us about stock availability.
-
Pyromate Black Jack – Black & Gold Welders Glove 40cm Gauntlet
$15.95 incl. GST Add to cartPRODUCT DETAILS:
– High quality cow split leather for comfort and economy
– Lined and welted
– 406mm (16 inches) long for forearm protection
– One Size Fits All -
Metrinch 25pce Standard & Deep Wall Socket Set 3/8 drive
$242.95 incl. GST Add to cartAbout this item:
– This 25 piece set equals a 69 piece conventional set
– 3/8″ Accessories: 16mm & 21mm Spark Plug Sockets, Quick Release Reversible Ratchet, 150mm Extension Wobble Bar, Universal Joint
– Size Range: 10, 11, 12, 13, 14, 16, 17, 19, 20, 21, 22mm
– Metrinch’s patented Wall Drive allows the wrench to grip a much larger wall surface of the fastener and also each tool can be used for both metric and imperial, plus damaged nuts and bolts
– All Metrinch tools are forged from high grade chrome vanadium steel for lifetime use
