Pitmaster
Showing 1–18 of 21 results
-
Pit Master PM-300 48v Heavy Duty LED Work Light
LED lighting is a new emerging technology that requires multidisciplinary engineering team specialising in power electronics components, thermal management, mechanical engineering, control and measurement software and hardware design, optics design and system engineering.
FEATURES:
– Designed for mining and industrial applications
– Ingress protection IP68 rated
– Tempered glass lens
– Deutsch connector
– Built in thermal management
– No radio frequency interference
– Designed with the latest in LED and power management technology. Built in thermal management electronics monitors system performance to ensure constant and maximum light outputs
– LED array delivers 45,000 lumen output
– Built-in electronic thermal management with a state of the art current driver provides optimum light output and a luminary life time span that exceeds 50k hours. -
Pit Master Service Filter Kit – Kubota Z482
Complete Filter Service Kit for Pit Master Lighting Towers – Kubota Z482
Includes:
- Donaldson Outer Air Filter
- Pit Master Fuel Filter / Separator
- Pit Master Engine Oil Filter
Value: $114.93
-
Pit Master Engine Oil Filter
Pit Master Oil Filters provide maximum protection for your vehicle’s engine. Its superior filtration system traps contaminants with 99% efficiency over the life of the filter.
-
Pit Master Fuel Filter / Separator
Pit Master Heavy Duty Fuel Filters deliver a balance of efficiency, life and flow for optimal quality fuel filtration.
-
Donaldson Outer Air Filter
- For Kubota Z482
Donaldson is a leading worldwide provider of filtration systems and replacement parts.
The Donaldson range of high quality air filters has been designed specifically to protect your investment in the harshest environments. Donaldson air filters are setting new standards in filtration quality, coverage and performance – with filters that fit their own air cleaners and those manufactured by others. When you choose Donaldson air filters, you get performance that’s anything but standard.
-
Donaldson Inner Air Filter
- For Kubota Z482
Donaldson is a leading worldwide provider of filtration systems and replacement parts.
The Donaldson range of high quality air filters has been designed specifically to protect your investment in the harshest environments. Donaldson air filters are setting new standards in filtration quality, coverage and performance – with filters that fit their own air cleaners and those manufactured by others. When you choose Donaldson air filters, you get performance that’s anything but standard.
-
2SHTM-600 Pit Master Solar LED Lighting Tower
2SHTM-600 Pit Master Solar LED Lighting Tower
Solar charged, battery powered, LED lighting towers are designed for applications where exhaust emissions & engine noise are prohibited. Popular applications include; Civil works in residential zones, Film production, events & promotions, emergency situations, roadworks, flammable environments, tunnels & enclosed spaces.
- No Noise
- No Emissions
- No Maintenance
- No Fuel
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
14HKP3000 LDS Pit Master LED Skid Lighting Tower
14HKP3000 LDS Pit Master LED Skid Lighting Tower
The Light Duty LED Skid Lighting Tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to the mining industry. With built-in auto start/stop, hydraulic boom and light skid base, this unit can be positioned in most mine site areas. The modular engine and hydraulic replacement system has been designed to minimise maintenance time, ensuring that possible production loss is kept to a minimum.
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
12HKP3000 LDS Pit Master LED Skid Lighting Tower
12HKP3000 LDS Pit Master LED Skid Lighting Tower
The Light Duty LED Skid Lighting Tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to the mining industry. With built-in auto start/stop, hydraulic boom and light skid base, this unit can be positioned in most mine site areas. The modular engine and hydraulic replacement system has been designed to minimise maintenance time, ensuring that possible production loss is kept to a minimum.
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
12HKP3000 Pit Master LED Lighting Tower
12HKP3000 Pit Master LED Lighting Tower
The Heavy Duty Tandem LED lighting tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to a diverse range of industry sectors. With built-in auto start/stop, hydraulic boom and stabiliser legs, site setup can be achieved within a minimum timeframe while still being towable by a light commercial vehicle.
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
8HTM2000 Pit Master LED Lighting Tower
8HTM2000 Pit Master LED Lighting Tower
The Pit Master Single Axle Hydraulic LED lighting tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to a diverse range of industry sectors. With built-in auto start/stop, hydraulic boom and stabiliser legs, site setup can be achieved within a minimum timeframe.
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
4HTM1500-48v Pit Master LED Lighting Tower
4HTM1500-48v Pit Master LED Lighting Tower
The Pit Master Single Axle Hydraulic LED lighting tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to a diverse range of industry sectors. With built-in auto start/stop, hydraulic boom and stabiliser legs, site setup can be achieved within a minimum timeframe.
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
4HTM1500-24v Pit Master LED Lighting Tower
4HTM1500-24v Pit Master LED Lighting Tower
The Pit Master Single Axle Hydraulic LED lighting tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to a diverse range of industry sectors. With built-in auto start/stop, hydraulic boom and stabiliser legs, site setup can be achieved within a minimum timeframe.
Available for Dry Hire or Purchase. Please phone on (07) 4842 9800 or CONTACT US for a quote.
ABOUT PIT MASTER OEM
The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.
The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.
ABOUT OUR LED LIGHTING TOWERS
The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors. Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.
Additional compliances that are included as “Standard issue” on all but the entry towers include:
- MDG15 Compliance– Mobile and transportable equipment for use in mines.
- AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
- MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
- 1 Compliance– Safety of Machinery 2006.
- 1202 Compliance– General principles / technical principles clause 3.
- Mine Site Compliance– Light vehicles and ancillary equipment
-
Pit Master PM-300 24v Heavy Duty LED Work Light
LED lighting is a new emerging technology that requires multidisciplinary engineering team specialising in power electronics components, thermal management, mechanical engineering, control and measurement software and hardware design, optics design and system engineering.
FEATURES:
– Designed for mining and industrial applications
– Ingress protection IP68 rated
– Tempered glass lens
– Deutsch connector
– Built in thermal management
– No radio frequency interference
– Designed with the latest in LED and power management technology. Built in thermal management electronics monitors system performance to ensure constant and maximum light outputs
– LED array delivers 49,000 lumen output
– Built-in electronic thermal management with a state of the art current driver provides optimum light output and a luminary life time span that exceeds 50k hours. -
Pit Master PM-112 24v Heavy Duty LED Work Light
LED lighting is a new emerging technology that requires multidisciplinary engineering team specialising in power electronics components, thermal management, mechanical engineering, control and measurement software and hardware design, optics design and system engineering.
FEATURES:
– Designed for mining and industrial applications
– Ingress protection IP68 rated
– Tempered glass lens
– Deutsch connector
– Built in thermal management
– No radio frequency interference
– Designed with the latest in LED and power management technology. Built in thermal management electronics monitors system performance to ensure constant and maximum light outputs
– LED array delivers 49,000 lumen output
– Built-in electronic thermal management with a state of the art current driver provides optimum light output and a luminary life time span that exceeds 50k hours. -
Pit Master PB-6 Heavy Duty LED Work Light
Tough as it can be. The PB-6 is designed to withstand almost any extreme conditions and offers over 2,500 lumen output at 29 W with extreme lumen/W efficiency. It can be powered with 12 or 24 VDC. The PB-6 is designed for use in harsh environments where small size and high brightness output are required. The PB-6’s reliability and efficiency make it ideal for marine, solar cell, earthmoving and mining equipment. For use in heavy Industrial or Mining applications.
FEATURES:
– Designed for mining and industrial applications
– Applications – Marine, Solar Cell, Earthmoving & Mining Equipment
– Ingress protection IP68 rated
– Tempered glass lens
– Multi Voltage 12/24 VDC- Deutsch connector with gold plated contacts
– Optimised built in thermal protection
-High transparency secondary optics. Lens material Optical grade PMMA
-Adjustable tilt up to ± 70°
– No radio frequency interference
– PC-6 is designed with the latest in LED and power management technology. Built in thermal management electronics monitors system performance to ensure constant and maximum light outputs
– LED array with 6 high brightness CREE XM-L2 diodes with the best efficiency performance, delivering over 2500 lumen output
– Built-in electronic thermal management with a state of the art current driver provides optimum light output and a luminary life time span that exceeds 50k hours.MODEL
PB-6 LED Work LightPART NUMBERS
Flood: SX62-0716
Spot: SX62-0717RECOMMENDED USE
Marine, Solar Cell, Work Lights, Engine Bays and Reverse Lighting Applications.DESCRIPTION
The PB-6 is designed with six CREE XM-L2 LED’s and offers a 2,500 effective lumen output at 29 watts with an 86 lumen/W efficiency. Purpose built for the mining industry, it is of a small size but has a high-power output. -
Pit Master PB-12 LED Work Light
MODEL
PB-12 LED Work LightPART NUMBERS
Spot: SX62-0646
Flood: SX62-0647RECOMMENDED USE
Marine, Solar Cell, Work Lights for Heavy Equipment.DESCRIPTION
The PB-12 is designed using the latest LED technology available for use in extreme applications such as the mining industry. The intergrated technology utilised in the PB-12, include 12 CREE XM-L2 LED?s with a light output of 6,000 effective lumens, delivering a 100 lumen/W efficiency.Applications ? Marine, Solar Cell, Earthmoving & Mining Equipment
-
HG8000 Water Cooled Diesel Digital Generator 8.8kVa
Pit Master’s digital generators feature high performance digital inverter technology. By delivering high quality, high output, stable electricity it makes them an ideal power source for frequency sensitive equipment. Light, quiet and portable, Pit Master digital generators are ideally suited for the Mining, Industrial and Construction sectors.
HEAVY ITEM: CLICK AND COLLECT AT CHECKOUT TO AVOID SHIPPING COSTS.