8HTM2000 Pit Master LED Lighting Tower

SKU: 8HTM2000

8HTM2000 Pit Master LED Lighting Tower

The Pit Master Single Axle Hydraulic LED lighting tower has been designed to deliver the most powerful lighting, low maintenance and cost saving solution to a diverse range of industry sectors. With built-in auto start/stop, hydraulic boom and stabiliser legs, site setup can be achieved within a minimum timeframe.

VIEW SPEC SHEET

Available for Dry Hire or Purchase.  Please phone on (07) 4842 9800 or CONTACT US for a quote.

ABOUT PIT MASTER OEM

The world’s leading manufacturer of the most powerful Extra Low Voltage LED Lighting Towers available and the only manufacturer that provides a full range of LED Lighting Towers for all applications within the Mining, Industrial and Construction sectors.

The in-house research and development of the Pit Master LED extra low voltage lighting technology and the use of a smaller engine size has been combined to deliver the Pit Master LED Lighting Tower, bringing many demonstrated operational advantages to the end user, including higher levels of safety, reduced fuel burn, lower maintenance costs and increased utilisation levels.

ABOUT OUR LED LIGHTING TOWERS

The Pit Master LED Lighting Towers have undergone rigorous on-ground testing and have been proven to have comparable lighting output to existing metal halide units currently being used within the construction, mining and industrial sectors.  Our manufacturing program follows a continuous improvement and development philosophy, while adopting stringent quality processes to ensure that the Pit Master LED Lighting towers comply with all requirements under the Motor Vehicle Standards Act 1989, OH&S Act 2000, OH&S Regulation 2001 NSW and the Coal Mining Health and Safety Act 1999.

Additional compliances that are included as “Standard issue” on all but the entry towers include:

  • MDG15 Compliance– Mobile and transportable equipment for use in mines.
  • AS-4242:1994 Compliance– For use in mines / Electrical wiring systems at extra low voltage.
  • MDG41 Compliance– Guideline for fluid power system safety at mines December 2010.
  • 1 Compliance– Safety of Machinery 2006.
  • 1202 Compliance– General principles / technical principles clause 3.
  • Mine Site Compliance– Light vehicles and ancillary equipment

Click and Collect Available (Mackay Only)

Product Description

8HTM2000 Pit Master LED Lighting Tower

Standard Inclusions:

Controls Electronic Controller – Auto Start/Stop
Engine Protection Fail Safe Shutdown – Temp, Oil and Water
Radiator Mine Safe Radiator Cap
Battery Isolation Single Pole with Lockout
Start Isolation Single Pole with Lockout
MDG15 Electrical Comp As per Regulated Standards
MDG41 Hydraulic As per Regulated Standards
E-Stop Standard
Wheel Chocks Standard
Chassis/Sub Frame Hot Dipped Galvanised
Mud Guards Hot Dipped Galvanised
Fuel Tank Double Bunded
Tow Hitch 50mm Ball or 75mm Pintle Ring
Jockey Wheel Heavy Duty Swing Away
Wheel Nut Indicators Standard Fitment
Fire Extinguisher 4.5kg Standard Fitment
Oil Recovery Oil Evacuation Kit
Fuel Recovery Fuel Evacuation Tap
Jump Start Cat or Anderson Plug
Service Upgrades 500hr Water Separator/Filter & Sump

 

Technical Data:

Lights 7 x Pit Master Heavy-Duty PM210
dB Level 69.6
Light Output 315,000 Lumens (2100W)
Tower Voltage 48V DC
Wind Rating Cert 1635 – 110km/h
Alternator 4 Pole Direct Drive
Engine Kubota Z482
Fuel Tank Capacity 215L
Fuel Tank Hours 268hrs
Boom Rotation Electric Rotation 340 degrees, 100% ground coverage
Boom Hydraulic Lift/Extension
Legs Hydraulic Operation

 

Measurements:

Height – 2,470 mm

Length – 4,280 mm

Width – 1,800mm

Mast Extended Height – 9.0Mtr

Weight (Tare) – 1,920kg


VIEW SPEC SHEET

Available for Dry Hire or Purchase.  Please phone on (07) 4842 9800 or CONTACT US for a quote.

 

Specifications

Reviews

Delivery

Orders for available parts will be despatched within 2 working days. Delivery times will depend on location usually with three days for eastern states. Information on out-of-stock items will be provided on a case-by-case basis.

Returns Policy

Last updated November 10, 2021

We want you to be totally satisfied with our products and services.

There may be times when you will need to return a product purchased from one of our stores.

Our Returns Policy is designed to assist you with your return.

RETURNS POLICY

Southern Cross Industrial Group warrants that all new Products will be free from defects in materials and workmanship, under normal use and service, for the manufacturer’s applicable warranty period.

Southern Cross Industrial Group’s sole obligation for valid returns shall be limited to repair or replacement of the product at our place of business, at the product manufacturer’s discretion and shall be conditioned upon Southern Cross Industrial Group receiving written notice of the returns claim within a reasonable time frame after failure.

Only authorised personnel of the Southern Cross Industrial Group can approve returns/repairs or deviate from this Policy in any manner, upon consultation with the Product Manufacturer.

We offer replacements, store credit or refunds where products have a major failure, such as:

  • When they are faulty
  • Wrongly described
  • Different from a sample shown to you; or
  • Do not do what they are supposed to do

 

Please note: we are not required to replace your product if you simply change your mind.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

We may need to conduct an assessment of your product to determine whether a repair, replacement or refund is appropriate. Certain technical products may need to be sent to the manufacturer or their repair agent for assessment, such as sound, electrical and motor driven products

Southern Cross Industrial Group does not provide for travel or transport costs under warranty repair or replacement.

Southern Cross Industrial Group does not loan or supply the use of items during warranty repair, including but not limited to machines, tools, attachments, and other products.

 HOW LONG DO YOU HAVE TO RETURN A PRODUCT?

Consumer guarantees under the Australian Consumer Law are not limited by a defined time period and can vary from product to product depending on factors such as the nature of goods, price and statements made on packaging and product labels.  Please contact us and we assist you with further information about the returns period for the product you return.

EXPENSES RELATING TO PRODUCT RETURNS

Any expenses relating to the return of the product will be paid for by the customer.  Depending on the manufacturing company’s warranty policy they may provide a refund for costs incurred.  We recommend keeping copies of the receipts involved in the returns process.

We may need to conduct an assessment of your product to determine whether a repair, replacement or refund is appropriate. Certain technical products may need to be sent to the manufacturer or their repair agent for assessment, such as sound, electrical and motor driven products

LIAISING WITH THE MANUFACTURER

For some product assessments you may have the option to liaise directly with the manufacturer, or their repair agent. Our store team members can provide you with the relevant manufacturer contact details.

Products assessed as having a minor fault will be repaired by the manufacturer and returned to you within a reasonable time. We offer a refund or replacement if the product is assessed as having a major failure.

EXCLUSIONS

In some cases a refund, replacement, or repair may not be offered if you have:

  • Modified the product
  • Misused the product contrary to user instructions or packaging labels or
  • Simply change your mind

 

Certain products are excluded under our Returns Policy unless they are faulty, these include:

  • Custom made orders such as laser engraved traffolytes and vehicle call signs
  • Gift-cards, vouchers, and/or credit vouchers

 

SPECIAL PROCEDURES FOR THE RETURN OF CERTAIN PRODUCTS

For safety reasons, please contact us before returning any bulky or fuel operated products, such as Generators and Lawn Equipment.

HOW DO I RETURN MY ORDER

Take your product in store to where it was purchased.  Contact us if you purchased online and want to know which store to return to. This includes products that carry a manufacturer’s warranty, which may need to be assessed by the manufacturer.

What information is needed to complete your return?

  • Show your receipt or other proof of purchase (bank statement).
  • Try to return the product in the same condition as it was purchased (including manuals, accessories and packaging).
  • Provide us with any extra information we may need to process your return.

With a receipt

For an exchange, credit, refund or repair we ask for your name, telephone number and signature in addition to your receipt.

All purchases made on a debit/credit card will be credited back to the original card used, so please have your card with you.

Without a receipt

If you don’t have a receipt, we ask for your photo identification showing your name, address and signature.

You can help us determine proof of purchase by providing a bank statement or similar.

Consumer guarantees under the Australian Consumer Law are not limited by a defined time period and can vary from product to product depending on factors such as the nature of goods, price and statements made on packaging and product labels.

Our Store Managers can assist you with further information about the warranty period for the product you return.

RETURNS PROCESS

To return an item, please email customer service before returning to obtain a Return Merchandise Authorization (RMA) number. After receiving an RMA number, place the item securely in its original packaging and include your proof of purchase, and mail your return to the following address:

PO Box 5999, Mackay, QLD, 4740
Southern Cross Industrial Group
Attn: Returns
RMA #
24-32 Interlink Court
Paget, Mackay, Queensland 4740
Australia

QUESTIONS
If you have any questions concerning our return policy, please contact us at:

+61 (07) 4842 9800 or contact us.

Call us on (07) 4842-9800, We have what you NEED! CONTACT US